What details do you need to pay attention to in the process of cleaning leather products？On this questionTianjin Cleaning CompanySmall series to take you to understand in detail。
1.When the dust on the leather surface is very difficult to deal with, the lemon peel can be scrubbed。
2.Using the egg white to rub leather products, not only can remove dirt, but also make the skin shiny。
3.First wipe the stain with a cloth or soft brush, and then apply a little wind shilin on the appearance, and then wipe with a flannel cloth after a moment, the effect is very good
4.Apply the mixture of 6 parts castor oil and 4 parts alcohol on the leather covered with dust, leave it for one day and night, and then mix it with pure castor oil to soften it.
5.Some dust and dirt is difficult to remove, can be wet cloth with soap coated all over the appearance of leather products, and then wipe the soap with a velvet cloth, let it slowly dry, and then wipe with furniture wax wipe。
Two: Oil pollution
Remove the oil on the leather, you can use a thick paste mixed with bleach powder and water to apply dry and then remove the above powder。Repeat this process if necessary。Then polish it the usual way。This treatment is not harmful to the leather, and will not fade the color。
Three: Ink stains
Apply wet baking soda to the stain。Baking soda if there is a color display method. That is, replace.Until the stain is removed and then dried, and finally polished。
霉迹
You can apply Vaseline to the moldy spot, and after 10 minutes, wipe the vaseline off with a soft cloth as if it were new
Four: Seawater tracks
Use a cup of hot milk and a small stone soda mixture to remove the trace and let it dry gradually。Repeat if necessary。If the stain turns black, mix an equal amount of ammonia with milk, wipe the stain gently with this mixture, and then slowly allow it to dry completely.If the leather is hard after drying, it is advisable to wipe it with castor oil and polish it finally。